Can’t Access Know How to Fix the Issue!


You know that feeling when you aren’t able to access the web page of your router when it’s needed? Sure you do! Otherwise you wouldn’t be lurking all around Google looking for a solution to your problem. Well, the good news is that you’ve come to the right placin search for an answer. Here, I’ve mentioned the topmost reasons why you’re facing the not working issue along with the tips to troubleshoot it.

Reasons Why You’re Facing Not Working Issue

There can be several factors stopping you from accessing the web page. Some of them are mentioned below:

  • Improper hardware configuration
  • Random technical glitch
  • Router and modem not connected
  • Incorrect web address entered
  • Outdated web browser
  • Corrupted or outdated firmware

Now that you’re aware of the reasons why are facing the not working issue, walk through the troubleshooting tips mentioned below and know how to fix it:

How to Fix Netgear Not Working Issue?

Outlined below are topmost ways through which you can easily get rid of the issue at hand. On the off chance, if these tips aren’t able to help you out, know that you can reach out to me through the comments section below at any hour of the day.

Use the Default IP of Your Router

Start by checking whether you’ve entered the correct web address or not. If not, correct your mistake immediately by typing the correct web address in the address bar of your web browser. If required, you can also clear up the cache, cookies, and browsing history of your browser.

What happened? Being careful didn’t really work in your favor? Well, in that case, I recommend you to use to log into your Netgear WiFi router. is your default Netgear router IP. In case you need any more information regarding the IP of your router, you can refer to the Netgear manual any time.

Switch to a Different Connection Mode

One of the major reasons why you’re facing the not working issue is because the connection between your router and modem isn’t proper. Thus, make sure that both your WiFi devices are connected properly.

And to ensure that no mistake happens from your side again, connect your devices using an Ethernet cable instead of connecting them wirelessly. The reason being, using a cable to connect devices is a reliable option in comparison.

Clear the Cache of Your Browser

The cache gets accumulated in your web browser over time. It’s quite important to clear out this clutter if you don’t want your device to get stuck with technical issues. Mentioned below are the instructions that you need to follow in order to clear the cache of your web browser:

  • Open your web browser.
  • Click on the three dotted button located at the top right corner.
  • Go to More Tools and select Clear Browsing Data.
  • Then, select the Categories that you want to delete and hit Enter.

After clearing the cache of your web browser, try to perform routerlogin. Still no luck? No problem! I still have one last option for you to give a try. And that is, factory default reset.

Perform Factory Default Reset

Here is how to restore your Netgear WiFi router to its factory default settings:

  • Power on your WiFi device.
  • Look for the Reset button.
  • Once found, press it carefully.
  • Press the button with a sharp object an oil pin or a paper clip.
  • Hold the button for a couple of seconds before releasing it.

After you reset your WiFi device, you’ll surely get rid of the not working issue.


Please enter your comment!
Please enter your name here